Green world
Environmentally friendly die
Home > About Us > Blog > June 2018
What should you pay attention to when using laser tube on laser die board cutting machine
By Owen  2018-06-07
laser die board cutting machine, laser die cutter,
When using a laser tube on laser die board cutting machine, it is necessary to pay attention to the best use of pure water or distilled water for cooling, and better keep the water temperature below 25°C.

 

In summer, the temperature is relatively high. It is necessary to pay attention to changing the cooling water frequently. If the temperature is too high, laser die cutter needs to be stopped and rested. The temperature of cooling water in winter is relatively cold. After the laser die board cutting machine is our of work, it is necessary to wipe the cooling water outside, to avoid freezing the laser tube.

 

If the laser die cutter use the pump cooling system, you must ensure that the cooling water flow per minute at least 2 to 4 liters, if the cooling flow is not enough, it will results in poor water temperature cooling, easy to cause the laser tube power dropping.

 

What should you pay attention to when using laser tube on laser die board cutting machine.png


At the output port of the laser tube on laser die board cutting machine, to avoid being contaminated, be noted that the smoke generated during the adjustment of the optical path or machine processing, it will cause the surface of the output port to be blurred and reduce the power of the laser tube. So laser die cutter must work accompanying with the exhaust equipment opening. To make sure the laser die board cutting machine works without smoke.

 

After the laser tube on laser die cutter is used for a long time, there will be incrustation on the tube circulation system. Need to pay attention to the regular use of 20% diluted hydrochloric acid to clean the cooling pipe.

 

The first time to install the laser tube on laser die board cutting machine, do not remove the thin wire on the electrode, because the wire and laser tube life is closely related, it is to prevent burning the presence of the output window surface.

 

The laser tube is a glass product. When installing and debugging, take care to handle it gently. The ends of the laser tube must be protected from external impact and dirt contamination.

 

If you pay more attention to the regular maintenance of laser tubes, laser tubes on laser die cutter can be used longer.

57.8K
Green World Environmentally friendly die

Dongguan Yisong High Technology Co., Ltd.


Add: 3rd Floor, Huafeng Bld., Huangjin Road, Baima Village, Nancheng District, Dongguan Guangdong 523000, China

E-mail: sales@yisongcnc.com
TEL:+86(0)769-3897 1768
sitemap privacy policy Copyright © Yisong High Technology All Rights Reserved