环保世界
环保刀模
Home > 关于我们 > 博客 > April 2018
Five small ways to make your laser die cutting machine focus on longer lens life
By Owen  2018-04-10
laser die cutting machine, laser die cutting, Yisong, die board sawing machine,

Everyone knows that laser die cutting machine need to  use laser die cutting focus lens for a long period of time.  laser die cutting focus lens.


They often need to replace some of them to ensure the performance of laser die cutting machine.

These accessories are called wearing parts. laser die cutting focus lens

6365886272576348458208584.jpg


The nozzles and lenses are the most frequently replaced items on laser die cutting machine.Focusing the lens is to focus the laser into one focal point, and the smaller the focal point, the smaller the divergence angle of the light.


As long as the lens on laser die cutting machine is clean and the light transmittance is high, the cleanliness of the focusing lens on laser die cutting machine is very important.


In addition, the laser’s energy density is very high, and the clean lens on laser die cutting machine needs to use the water circulation to cool.


Otherwise it will cause the lens of laser die cutting machine heated and deformed, which will seriously affect the cutting quality.


So what method can extend the life of the laser lens on laser die cutting machine?


Here are some small ways to share:


1. Generally, in the laser sealed optical path, dry, oil-free  laser die cutting focus lens dust-free positive pressure air is used to ensure that dust and impurities in the atmosphere cannot enter the optical path, thereby preventing the contamination of the optical lens on laser die cutting machine


2. The slag produced by the laser die cutting blows the auxiliary air downward from the cutting nozzle of laser die cutting machine.thereby greatly reducing the damage of the waste residue to the lower part of the focusing lens on laser die cutting machine.


3. If it is an ultra-high-speed perforation.The perforat oil can spray  before the perforation so that the slag does not fall vertically toward the torch but falls to the side.This reduces the damage to the lens on laser die cutting machine.

4. Minimize the use of ultra-high-speed perforation.Use conventional perforation to extend the life of the focusing mirror on laser die cutting machine.


5.So It is best to perform a cleaning and maintenance on the focus lens before each boot operation.


Although it is a troublesome task to clean and maintain the focusing lens of the laser die cutting machine.It is a very significant thing for the enterprise to save the cost of extending the service life of the lens on laser die cutting machine.


Here we released Yisong die board sawing machine, no laser cutting and no need laser lens, we use saw blade to cut and it's the only consumables, which is easy to get replaced and cheap price.

6365869411362734549143959.jpg


You can check more details about Yisong die board sawing machine on web: Yisong environmentally friendly die board sawing machine as a kind of modern manufacturing mode, accords with the demand of sustainable development

57.8K
环保世界 环保刀模

东 莞 市 益 松 数 控 科 技 有 限 公 司

地址:广东省东莞市南城区白马黄金路华丰大厦三层

Tel: +86(769)3897 1768     Fax: +86(769)2290 1769


邮箱:sales@yisongcnc.com

网站地图 隐私政策 版权所有 © 东莞市益松数控科技有限公司