环保世界
环保刀模
Home > 关于我们 > 博客 > May 2018
Die cutters used in automatic rule bender
By Eric  2018-05-15
Automatic rule bender, automatic steel rule die bender, blade bending machine,

The types of the die board used in automatic rule bender range from the blade angle, the hardness of the blade body and the blade front, the pattern of the blade edge, and the surface processing technology of the blade and the blade body. Today, we have learned more about the die cutters used in automatic rule bender from five aspects: thickness, height, cutting edge, hardness, and packaging.

 

timg (11).jpg


Automatic steel rule die bender for cutting knife basic knowledge:

1. The thickness of an automatic steel rule die bender for die board, the common unit is MM, and the thickness of the commonly used knife is 0.45mm, 0.53MM, 0.71MM, 1.05MM.

2. The height of die board for automatic steel rule die bender, the common unit is MM, and the height specification is very much, not from 8-100MM. Etc., choose according to your needs.

3. Automatic steel rule die bender for cutting edge is generally 30 °, 42 °, 52 ° specifications.

4. The hardness of die board for blade bending machine, rock well hardness (HRC) and Vickers hardness (HV) are used. The hardness is generally below 50HRC, and the hardness of the blade is generally above 55HRC.

5, Blade bending machine for die board packaging form, there are two types, the length is generally 1M/ bar, 100M/ disc.

57.8K
环保世界 环保刀模

东 莞 市 益 松 数 控 科 技 有 限 公 司

地址:广东省东莞市南城区白马黄金路华丰大厦三层

Tel: +86(769)3897 1768     Fax: +86(769)2290 1769


邮箱:sales@yisongcnc.com

网站地图 隐私政策 版权所有 © 东莞市益松数控科技有限公司