环保世界
环保刀模
Home > 关于我们 > 博客 > May 2018
Automatic rule bender operation details in hot weather
By Eric  2018-05-19
automatic rule bender, automatic steel rule die bender, blade bending machine,

Go out for 5 minutes and sweat for 2 hours.

At present, the temperatures around the country are about to enter the hot weather. For the automatic rule bender that work 24 hours a day, they must also pay attention to cooling and heat.

timg (29).jpg


We know that high-temperature work is much less effective for people, and the efficiency of work is greatly reduced. Not to mention the automatic steel rule die bender, then the automatic steel rule die bender will work under hot weather and it will certainly increase its temperature. Then, the automatic steel rule die bender will be opened as far as possible in the conditional factory. Air-conditioning or large-discharge fan, ventilation and heat fast, conditions are not allowed, you can open the automatic steel rule die bender at the front and rear chassis door, open the computer host dust door. At the same time, it is also possible to use a fan to face the motor and driver, slightly lowering the working temperature of the automatic steel rule die bender.

High temperatures can easily lead to the failure of the circuit of the blade bending machine, and the circuit alarms. In particular, the heat dissipation of the motor is not good, and the service life of the blade bending machine can also be reduced. In order to allow your blade bending machine to be more stable and orderly, the machete machine must pay attention to the blade bending machine.

57.8K
环保世界 环保刀模

东 莞 市 益 松 数 控 科 技 有 限 公 司

地址:广东省东莞市南城区白马黄金路华丰大厦三层

Tel: +86(769)3897 1768     Fax: +86(769)2290 1769


邮箱:sales@yisongcnc.com

网站地图 隐私政策 版权所有 © 东莞市益松数控科技有限公司