Steel rule bending machine safety operation matters:

1. To prevent electric shock

Do not touch any electrical components in the electrical cabinet and the console when power is applied or rule blade bending machine is running. Otherwise an electric shock will occur.

Do not operate any switch knobs with wet hands to prevent electric shock.

Please do not check the line or replace the electrical components with power, otherwise you may get an electric shock or injury.

 2. To prevent fire

The working materials used in the steel rule bending machine are flammable gases such as acetylene, propane, liquefied gas, etc. Therefore, it is necessary to periodically check whether the entire gas path is sealed.

Keep the air source part of rule blade bending machine away from open flames and place normal carbon dioxide or other corresponding fire extinguishing devices nearby.

The operator should control it in time to adjust the fire to avoid a fire.

3, To prevent damage

When steel rule bending machine is running, pay attention to whether there are people or other objects in front to avoid injury.

After each cut, the torch should be raised to the highest position to avoid hitting the steel plate and damaging the torch.

Mechanical maintenance personnel should ensure that rule blade bending machine is in a working state during maintenance and hang up a warning sign to avoid a human accident caused by sudden operation of the machine.